Dual Retriggerable Monostable Multivibrators With Schmitt-trigger Inputs

  /ordering information The ?LV123A devices are dual retriggerable monostable Multivibrators designed for 2-V to 5.5-V VCC operation. These edge-triggered Multivibrators feature output pulse-duration control by three methods. In the first method, the A input is low and the B input goes high. In the second method, the B input is high and the A input goes low. In the third method, the A input is low, the B input is high, and the clear (CLR) input goes high. The output pulse duration is programmable by selecting external resistance and capacitance values. The external timing Capacitor must be connected between Cext and Rext/Cext (positive) and an external Resistor connected between Rext/Cext and VCC. To obtain variable pulse durations, connect an external variable resistance between Rext/Cext and VCC. The output pulse duration also can be reduced by taking CLR low. Pulse triggering occurs at a particular voltage level and is not directly related to the transition time of the input pulse. The A, B, and CLR inputs have Schmitt Triggers with sufficient hysteresis to handle slow input transition rates with jitter-free triggering at the outputs. Once triggered, the basic pulse duration can be extended by retriggering the gated low-level-active (A) or high-level-active (B) input. Pulse duration can be reduced by taking CLR low. The input/output timing diagram illustrates pulse control by retriggering the inputs and early clearing.
Item: SN54LV123A
File Size : 69 KB
Pages : 23 Pages

Other Part Numbers in this pdf file

Texas Instruments Incorporated
Draw SN54LV123A Schematic Online for Free