Quadruple 8-bit Digital-to-analog Converters

  The TLC7225 consists of four 8-bit voltage-output Digital-to-Analog converters (DACs), with output Buffer amplifiers and Interface logic with double register-buffering. Separate on-chip Latches are provided for each of the DACs Data is transferred into one of these data Latches through a common 8-bit TTL/CMOS-compatible (5 V) input port. Control inputs A0 and A1 determine which DAC is loaded when WR goes low. Only the data held in the DAC Registers determines the analog outputs of the converters. The double Register buffering allows simultaneous update of all four outputs under control of LDAC. All logic inputs are TTL- and CMOS-level compatible and the control logic is speed compatible with most 8-bit microprocessors. Each DAC includes an output Buffer amplifier capable of driving up to 5 mA of output current. The TLC7225 performance is specified for input reference voltages from 2 V to VDD ? 4 V with dual supplies. The voltage-mode configuration of the DACs allow the TLC7225 to be operated from a single power-supply rail at a reference of 10 V. The TLC7225 is fabricated in a LinBiCMOS? process that has been specifically developed to allow high-speed digital logic Circuits and precision analog Circuits to be integrated on the same chip. The TLC7225 has a common 8-bit data bus with individual DAC Latches This provides a versatile control architecture for simple Interface to microprocessors. All latch-enable signals are level triggered. Combining four DACs four Operational Amplifiers and Interface logic into a small, 0.3-inch wide, 24-terminal SOIC allows significant reduction in board space requirements and offers increased reliability in systems using multiple converters. The pinout optimizes board layout with all of the analog inputs and outputs at one end
Item: TLC7225I
File Size : 40 KB
Pages : 21 Pages

Other Part Numbers in this pdf file

TLC7225CDWRG4  
Texas Instruments Incorporated
Draw TLC7225I Schematic Online for Free