Quad Uart With 64-byte Fifo

  The TL16C754 is a quad universal asynchronous Receiver Transmitter (UART) with 64-byte FIFOs automatic hardware/software flow control, and data rates up to 3 Mbps. The TL16C754 offers enhanced features. It has a transmission control Register (TCR) that stores received FIFO threshold level to start/stop transmission during hardware and software flow control. With the FIFO RDY Register the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status Registers provide the user with error indications, operational status, and modem Interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows onboard diagnostics. The UART transmits data sent to it from the peripheral 8-bit bus on the TX signal and receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or 8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The Receiver can detect break, idle or framing errors, FIFO overflow, and parity errors. The Transmitter can detect FIFO underflow. The UART also contains a software Interface for modem control operations, and software flow control and hardware flow control capabilities. The TL16C754 is available in 80-pin TQFP and 68-pin PLCC packages.
Item: TL16C754
File Size : 69 KB
Pages : 39 Pages

Other Part Numbers in this pdf file

Texas Instruments Incorporated
Draw TL16C754 Schematic Online for Free