Octal Bus Transceiver With S-state Outputs

  /ordering information This octal bus Transceiver is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVC245 is designed for asynchronous Communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the Resistor is determined by the current-sinking capability of the driver. ORDERING INFORMATION
Item: SN74ALC245
File Size : 32 KB
Pages : 11 Pages

Other Part Numbers in this pdf file

VA245   ALVC245  
Texas Instruments Incorporated
Draw SN74ALC245 Schematic Online for Free