625ksps, 24-bit Analog-to-digital Converter

  The ADS1672 is a high-speed, high-precision analog-to-digital converter (ADC). Using an advanced delta-sigma (??) architecture, it operates at speeds up to 625kSPS with outstanding ac performance and dc accuracy. The ADS1672 ADC is comprised of a low-drift, chopper-stabilized Modulator with out-of-range detection and a dual-path programmable digital Filter The dual Filter path allows the user to select between two post-processing filters: low-latency or wide-bandwidth. The low-latency Filter settles quickly in one cycle, for applications with large instantaneous changes, such as a multiplexer. The wide-bandwidth path provides an optimized frequency response for ac measurements with a passband ripple of less than 0.001dB, stop band attenuation of 115dB, and a bandwidth of 305kHz. The ADS1672 is controlled through I/O pins?there are no Registers to program. A dedicated START pin allows for direct control of conversions: toggle the START pin to begin a conversion, and then retrieve the output data. The flexible serial Interface supports data readback with either standard CMOS and LVDS logic levels, allowing the ADS1672 to directly connect to a wide range of Microcontrollers digital signal processors (DSPs), or field-programmable grid arrays (FPGAs). The ADS1672 operates from an analog supply of 5V and digital supply of 3V, and dissipates 350mW of power. When not in use, the PDWN pin can be used to power down all device circuitry. The device is fully specified over the industrial temperature range and is offered in a TQFP-64 package.
Item: ADS1672
File Size : 113 KB
Pages : 31 Pages

Other Part Numbers in this pdf file

ADS1672IPAGRG4   ADS1672IPAGR   ADS1672IPAGG4   ADS1672IPAG  
Texas Instruments Incorporated
Draw ADS1672 Schematic Online for Free