20-bit Fet Bus Switch With -2 V Undershoot Protection

  The SN74CBT16210C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT16210C provides protection for undershoot up to ?2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state. The SN74CBT16210C is organized as two 10-bit bus Switches with separate output-enable (1OE, 2OE) inputs. It can be used as two 10-bit bus Switches or as one 20-bit bus switch. When OE is low, the associated 10-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is high, the associated 10-bit bus switch is OFF, and the high-impedance state exists between the A and B ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the Resistor is determined by the current-sinking capability of the driver.
Item: SN74CBT16210C
File Size : 43 KB
Pages : 13 Pages

Other Part Numbers in this pdf file

SN74CBT16210CDLRG4   SN74CBT16210CDLR   SN74CBT16210CDLG4   SN74CBT16210CDL   SN74CBT16210CDGVR   SN74CBT16210CDGGR   74CBT16210CDGVRG4   74CBT16210CDGVRE4   74CBT16210CDGGRG4   74CBT16210CDGGRE4  
Texas Instruments Incorporated
Draw SN74CBT16210C Schematic Online for Free